Posts Tagged ‘drywall patch’

Matching Drywall To Plaster for a Smooth Transition

With most homes prior to the 1950’s mostly made with walls of lath and plaster, the inevitability of wall repair is pretty much unavoidable, from just repairing cracks to out  & out removal of large areas of plaster & lath.

Without going the purest route of repair with actual plaster, which involves multiple coats and drying time, we can use drywall to fill any holes or even large areas without removing more plaster than is necessary, as long as the remaining plaster is still stable and secure.

If you have removed all the plaster from a wall, corner to corner, top to bottom, and want to hang drywall, which may be the best option, then you need not read any further, just clean the studs and hang the drywall, but if your are matching portions of walls, then proceed. Read more…

Be the first to comment - What do you think?  Posted by Albert Bruce - November 15, 2010 at 9:18 pm

Categories: Wall Repair   Tags: , , , , , ,

Simple Drywall Patch, No Tape, No Screen, No Nails

[nggallery id=1]Having to patch a fist sized hole on plaster or drywall without studs or backing is a simple process of using a scrap piece of drywall and all purpose drywall mud, or joint compound, we’ll call it ‘mud’, ‘all purpose’, or ‘topping’ from here.

We had to put a 2 inch plumbing vent stack in the wall and the hole in the plaster ceiling ended up a bit to big with no wood framing to screw to, no problem with this simple method of drywall / plaster repair. This area is about 2 x 4 inches, but this method will work up to a size of about 8 x 8 inches.  See pics here

Be the first to comment - What do you think?  Posted by Albert Bruce - June 13, 2010 at 12:01 pm

Categories: Wall Repair   Tags: , , , , , , , , , ,